ABS Sensor

ABS Sensor — Electronic Detector of the Brake System

The ABS Sensor is a detection element in trucks and buses that continuously measures wheel rotation speed and transmits this information to the electronic control unit. It is a subgroup of the Brake System category and forms the core data source of the electronic control mechanism that prevents wheels from locking during braking. When the signal from the sensor is not accurate and uninterrupted, the system cannot engage, which is why this small but critical component is considered a direct part of overall brake safety. Especially in heavy commercial vehicles operating under high load, the sensor's ability to produce accurate and timely signals directly affects braking distance and driving stability.

The product range includes wheel speed sensors of different types and structures, along with their wiring harnesses and mounting accessories. Sensors are manufactured according to active or passive operating principles; both differ from one another in terms of signal generation method, and the correct type must be selected according to the vehicle. The catalog also includes complementary parts such as sensor rings, connector sets, and protective sleeves.

• Wheel speed sensors for front and rear axles
• Sensor wiring harness and connector sets
• Sensor ring (tone ring) and mounting brackets
• Fasteners and protective sleeves

In the product range, prepared with general compatibility for major truck and bus brands in mind, attention to vehicle model, sensor type, and cable length is recommended for correct sensor selection. For proper operation with other components of the Brake System, it is important that the distance between the sensor and the sensor ring and the mounting position conform to manufacturer tolerances. Periodic inspection and timely replacement ensure the uninterrupted operation of electronic brake control; therefore, when reviewing products, it is advisable to select the correct sensor suitable for your vehicle.

Frequently Asked Questions

What is an ABS Sensor? It is a detection element that measures wheel rotation speed and transmits it to the electronic control unit, playing a role in the electronic control of the Brake System.

What are the signs of ABS Sensor failure? Typical signs include the warning light illuminating on the dashboard, irregular response during braking, and the electronic brake control becoming disabled.

When should the ABS Sensor be replaced? Replacement is required if the warning light stays on continuously, a signal interruption is detected, or physical damage is observed on the sensor body.

How is the correct ABS Sensor selected? Selection should be made considering the sensor type suitable for the vehicle model, the correct cable length, and the connector structure.

How does the ABS Sensor relate to other parts of the Brake System? Working together with the sensor ring and the electronic control unit, it forms an integrated system that prevents wheel lock-up during braking.

Can a vehicle be used with a faulty ABS Sensor? The vehicle can physically move, but since electronic brake control will be disabled, it carries a safety risk and inspection is recommended without delay.

What should be considered when installing an ABS Sensor? The distance between the sensor and the sensor ring, cable routing, and a secure connector connection are important points during installation.