Thermostat
Subcategories
6Other Thermostat products 7
Products not assigned to any subcategory
No products on this page match the filter.
What is a Cooling System Thermostat?
A cooling system thermostat is a control part in the engine cooling circuit that decides, based on temperature, whether coolant is sent to the radiator. On trucks, tractor units and buses it is placed on the coolant path to keep engine heat in balance. When the engine is cold, it keeps coolant away from the radiator so the engine reaches its working temperature quickly, then opens as the fluid heats up to let it cool in the radiator. In the workshop it is also called a coolant thermostat. Over time, the part that wears most is the temperature-sensitive opening mechanism, spring and seat, while the gasket and housing can also lose their seal.
How does a cooling system thermostat work and what parts does it cover?
This category covers the valve that opens and closes the thermostat, along with the auxiliary parts that connect it to the engine.
- Thermostat valve: The main part that controls coolant flow to the radiator with a temperature-responsive opening mechanism.
- Thermostat housing: The body that holds the valve, carries coolant through it and connects to the engine block.
- Thermostat cover: Closes the top of the housing to prevent coolant from leaking out.
- Thermostat gasket: The rubber seal between housing and engine block that wears under heat and coolant.
- Thermostat pipe: The metal connector that links the housing to the radiator and other circuit lines.
Cooling System Thermostat Types
- Single thermostat: Preferred when only the valve is worn and the housing and gasket are still sound.
- Thermostat with housing: Suitable when the housing must be replaced along with the valve, especially if it is cracked or worn.
- Complete replacement kit: Provides a one-time fix when the valve, housing, gasket, cover and pipe are all renewed together.
- Models with different opening temperatures: The version matching the engine type and cooling circuit layout, as recommended by the manufacturer, is chosen.
How to choose the right Cooling System Thermostat?
The most reliable method is to check the reference on the removed part and the housing shape together with the engine type. An old thermostat taken out without comparing it side by side with the new part can cause fitting problems. Brands such as Mercedes-Benz, MAN, Scania, Volvo and DAF can use different layouts even within the same model series, so choosing by model name alone is a mistake. For opening temperature, check the vehicle's engine type and the manufacturer's recommendation.
| Criterion | What to check | Why it matters |
|---|---|---|
| Removed part | Reference and housing shape on the old thermostat | Parts that look alike can differ in connection direction |
| Engine type | Vehicle engine code and cooling circuit layout | Opening behavior suited to the engine is ensured |
| Opening temperature | Manufacturer recommendation and the specification of the current part | The engine neither warms up too late nor too early |
| Housing and connection | Pipe ports, bolt holes and surface flatness | Leaks and fitting errors are prevented |
| Gasket fit | Gasket seat between housing and engine block | Sealing is kept from day one |
| Kit contents | Cover, gasket and pipe supplied together | No second removal is needed due to missing parts |
Installation and maintenance points
- Draining coolant: Drain the system before removing the thermostat, and never open the cap before the engine has cooled.
- Gasket surface: Clean off old gasket residue and make sure no scratches or burrs remain on the surface.
- Direction and seating: Fit the valve in the correct direction with the spring side in place, as wrong seating will upset the opening.
- Tightening sequence: Tighten the housing bolts in a cross pattern and to the torque specified by the manufacturer.
- Filling coolant: Fill the system completely, bleed all air through the bleed screw, and check the level.
Common faults and their solutions
- Engine warms up slowly, weak heating: The valve is stuck open or its opening mechanism has worn out, so test and replace the valve.
- Engine overheats quickly: The valve may be staying closed; if coolant cannot pass to the radiator, replace the valve and bleed the circuit.
- Coolant leaking from the thermostat seat: The gasket is worn or the housing surface is uneven, so renew the gasket and housing surface together.
- Gauge rises and drops briefly: The valve may be opening and closing irregularly; check the spring and seat and replace the valve.
Frequently Asked Questions
What happens if the thermostat fails?
If the valve stays open, the engine warms up slowly and fuel consumption rises. If it stays closed, the temperature climbs quickly and the engine can suffer serious damage. For this reason, irregular movement on the temperature gauge must be taken seriously.
Can the thermostat be replaced on its own?
If the housing, gasket and cover are sound, only the valve can be replaced. If there is a crack in the housing, scratches on the surface or a leak at the gasket seat, a complete kit is the better choice.
When should the thermostat be replaced?
It should be replaced when the engine's warm-up behavior changes, when unexplained temperature swings appear in the cooling system, or when a leak is seen at the thermostat seat. If there is another fault in the engine, that should be inspected too.
Should the coolant be renewed when replacing the thermostat?
Since the system is drained, check the color and level of the fluid. If it is dirty or old, consider renewing it. Fluid quality matters for engine life as much as for the thermostat working correctly.
Can the thermostat be fitted without replacing the gasket?
If the old gasket is worn, hardened or stuck, the risk of a leak is high. Fitting with a new gasket is safer. A new gasket may not seal properly if any old gasket residue is left on the surface.