Repair Kit
All Repair Kit products 3
No products on this page match the filter.
What is a Trailer Height Control Valve Repair Kit?
A Trailer Height Control Valve Repair Kit is a set used to replace the worn or hardened seals, O-rings and springs inside the valve that balances the distance between the chassis and the axle on air-suspended trailers. Part of the brake system group, this valve regulates the air sent to the bellows according to load condition, and the seal and O-ring joints between the spool and the body wear over time. In the field, this kit is also known as a height valve repair kit or leveling valve seal kit.
How does a Trailer Height Control Valve Repair Kit work and what parts does it cover?
The valve converts the movement of the adjustment lever and linkage rod into an internal mechanism that opens and closes the air inlet and outlet passages. The repair kit focuses on the points where the mechanism leaks air, so its contents are the elements on surfaces exposed to pressurized air.
- Seal: prevents air leakage between the spool and the body.
- O-ring: seats in the grooves at the body and cover joint and closes the leak path.
- Gasket: holds the pressure between the valve cover and air connection surfaces.
- Spring: returns the spool and poppet to neutral so the adjustment movement reverses.
- Bushing: lets the adjustment lever shaft turn freely inside the body and spreads side loads into the body.
Trailer Height Control Valve Repair Kit variants
- Seal and O-ring set: preferred only when there is an air leak and the body is sound.
- Spool and spring set: preferred when wear or adjustment drift is seen on the spool and springs.
- Lever and bushing renewal set: preferred when there is play in the adjustment lever and clearance in the bushing.
How to choose the right Trailer Height Control Valve Repair Kit?
Selection should be made by examining the body shape of the removed valve, the location of the air connection ports and the end type to which the adjustment lever is connected, since these details define the trailer's system type. A complete valve unit is not part of this category, this set only covers repair parts such as seals, O-rings and springs. Even within the same model series of Mercedes-Benz, MAN, Scania, Volvo and DAF, different layouts can exist, so choosing by model name alone is an error.
| Criterion | What to check | Why it matters |
|---|---|---|
| System type | The air suspension layout of the trailer and the lever type the valve is connected to | Valves that look alike can come with different connections and internal layouts |
| Removed part | Structure of the seals, O-rings and spool, and wear on the surfaces | Ensures the kit contents match the faulty element |
| Leak point | Body joints, cover and air connection ports | Avoids unnecessary disassembly by replacing only the element that leaks |
| Lever and bushing condition | Play in the adjustment lever and clearance in the bushing | Mechanical play can cause height drift even after internal repair |
| Scope | Separate from the complete valve unit, repair parts only | Prevents wrong-category purchases and lost time during assembly |
Assembly and maintenance points
- Cleaning: body seats and spool surfaces must be fully cleaned before assembly, leaving no sand or chips.
- Lubrication: seals and O-rings should be coated with a lubricant compatible with the system, never fitted dry.
- Seal direction: seals must sit in their seats in the correct direction and without twisting.
- Lever setting: the lever position should be marked before disassembly, and the height setting checked again after assembly.
- Air test: after assembly, apply air and check connection points for leak sounds and with a soap bubble test.
Common faults and solutions
- Trailer sinks, air pressure drops in the bellows: the spool seal or O-ring may be worn; replace them and repeat the air leak test.
- Height setting drifts: play in the lever bushing or a weakened spool spring may be the cause; renew the bushing and spring and readjust.
- Whistling leak noise around the valve: the exhaust poppet or cover gasket may be leaking; check the poppet and gasket and replace if needed.
- Delayed or uneven braking feel when load changes: air to the bellows may be regulated unevenly; remove the valve, check spool, spring and seals, and replace worn parts.
Frequently Asked Questions
Does a Trailer Height Control Valve Repair Kit contain only seals and O-rings?
No, depending on the fault location the set may include seals, O-rings, gaskets, springs, bushings and poppets. Since not every kit contains all these parts, the scope list in the product description should always be checked.
Is a repair kit enough if the valve has an air leak?
If the leak comes from a body joint or the spool surface, a repair kit is usually sufficient. If the body is cracked or its seat is damaged, using only the kit is not a lasting fix, and the body and cover should be checked separately.
Should the valve be replaced if the adjustment lever has play?
Not always. Play is most often caused by wear in the lever bushing and the linkage pin. When the bushing and pin are renewed and the valve body is sound, the height can be corrected by readjusting the setting.
How is trailer height checked after assembly?
The trailer is filled with air so the bellows inflate, then it is parked on level ground and the distance between chassis and axle is measured. The measurement should be taken in the vehicle's loaded condition, and any deviation should be corrected through the adjustment lever.
Which trailers use this kit?
It is used on trailers with air suspension and a height control valve. Trailers with leaf spring or rigid suspension do not have this valve, so this kit is not needed for them.