Bolt
All Bolt products 22
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
Brake Caliper Mechanism, Bolt
No products on this page match the filter.
What is Air Disc Brake Caliper Mechanism Bolt?
The Air Disc Brake Caliper Mechanism Bolt is the fastener that secures the moving parts of a pneumatic brake caliper to its body on trucks and buses. Inside the caliper, components such as the guide pin, piston and spring must stay in place and operate smoothly, which requires the bolts to remain firmly tightened. In the workshop, this fastener is also called a cap screw. Over time, the threads of the bolt and the threaded holes in the housing are the parts that wear and loosen, and once clamping force is lost, the internal components can shift and upset braking balance. For this reason, bolt selection and torquing should be treated as a small but critical step in caliper maintenance.
How does the Air Disc Brake Caliper Mechanism Bolt work and what does it cover?
The bolt does not generate any movement in the caliper mechanism itself; it holds the position of the part it clamps. When the brake is applied, the forces generated are transferred to the housing connections, and the bolts must stay sound for these loads to be carried evenly. The connection points it covers are:
- Guide pin connection: fixes the guide pin to the housing and helps the brake pad move on the correct axis.
- Cover connection: attaches the mechanism cover to the housing and protects the piston and spring section inside from external contamination.
- Carrier connection: mounts the caliper to the carrier on the axle, ensuring braking force passes evenly from the housing to the axle.
- Seal and o-ring groove: helps the grooves seal properly; insufficient torque causes air leakage.
- Spring seat: prevents slipping at the point where the return spring seats.
Air Disc Brake Caliper Mechanism Bolt types
- Guide pin type bolt: used to secure the guide pin seat; keeps the mechanism housing and pin in place.
- Cover type bolt: preferred for fixing the mechanism cover to the housing; the clamping surface must be flat and clean.
- Carrier mounting bolt: connects the caliper to the axle carrier; since it works under load, its length and thread must match the removed part.
How to choose the right Air Disc Brake Caliper Mechanism Bolt?
The most reliable method is to use the removed bolt as a reference; thread length, head shape and seat depth should be compared together. The system type also matters, as different mechanism layouts can exist even within the same caliper family. Among heavy commercial vehicle brands, connection layouts may differ within the same model series, so selecting based on model name alone is an error. When ordering a replacement, the vehicle chassis information and the caliper's assembly group should be confirmed by a technician. During selection, avoid mixing worn parts or parts from a different caliper family. Related categories such as bushings, gaskets, seals, covers and gears cover separate product groups; this page covers only the bolt.
| Criterion | What to check | Why it matters |
|---|---|---|
| Removed part | Head shape and thread pattern of the bolt | A wrong thread will not seat in the housing hole |
| Seat depth | Whether the bolt fully seats in the recess and bottoms out | A short bolt leaves the connection loose when tightened |
| System type | Axle and carrier layout the caliper is mounted to | A change in carrier layout breaks bolt fit |
| Surface condition | Whether the seating surface is free of burrs, rust and dirt | A dirty surface reduces clamping force |
| Coating | Corrosion protection and surface finish of the bolt | Rust increases the risk of seizing and loosening |
Installation and maintenance considerations
- Clean seat: the bolt seat and threads must be cleaned before tightening, removing residue and rust. Metal chips or dirt must not fall into the bore during cleaning.
- Tightening sequence: on connections with several bolts, force must be distributed evenly; tightening one side first is not allowed.
- Torque value: bolts must be tightened to the value specified by the vehicle or part manufacturer, never by estimate.
- Locking: in vibration-prone areas, use a jam nut, lock plate or suitable locking product. The locking element must be reassessed on every bolt removed and refitted.
- Post-removal check: a bolt with damaged or stretched threads must not be reused and should be replaced with a new one.
Common faults and solutions
- Loose bolt and air leak: vibration may have reduced clamping force; the bolt is checked and replaced with a new one if necessary.
- Hissing noise: the seal or gasket on the connection surface may not be seated; the surface is cleaned and these parts are renewed.
- Uneven braking: one of the housing parts may have shifted; the caliper is removed and the bolt and guide pin seat are checked.
- Delayed braking: when the mechanism seizes, the connection around the bolt may be strained; moving parts are cleaned and connections retightened.
Frequently Asked Questions
What happens if the Air Disc Brake Caliper Mechanism Bolt loosens?
A loose bolt can allow housing parts to shift and cause air leakage. In this case, braking becomes uneven or may be delayed. When symptoms appear, the vehicle should be taken to a workshop and the connections inspected.
Can a removed bolt be refitted?
A bolt whose threads are undamaged and shows no sign of stretching can be reused. However, bolts that have been subjected to vibration or corroded should be replaced with new ones. The decision should be made by a technician based on the condition of the part.
What information is needed to find the right bolt?
The vehicle chassis information, the axle type the caliper is mounted to, and a photo of the removed bolt are the most important details. A photo of the surface and seat where the bolt was fitted should also be noted. Sharing this information with the seller reduces the risk of a wrong selection.
What should be done if the bolt seat has rust?
A new bolt should not be fitted before rust and dirt are removed. If the seat is damaged, the connection surface as well as the bolt must be inspected. After cleaning, the part should be seated and checked.
Can this bolt be used on every caliper?
No, the same bolt should not be used for every caliper. When the mechanism type, axle or carrier layout changes, the bolt length and seat fit may differ. Selection should consider both the removed part and the vehicle information.